Sean notches rafter tails in all of the etended rafter tails for the Tongue and Groove ceiling in the gable ends.

After some considerable trial and error, Richard decided to have the gutter notch (a 6-inch half circle) milled at the lumber yard.

Here is the first load back from the yard.

Richard and matias work on placing the extended rafter tails

A trial of the first couple of tails

This extended roofline will require some tree trimming.

Tino and Ramone work on shear and sheathing

The finished product.

Some sheathing in the family room

A little more sheathing in the back.